您的位置: 标准下载 » 国内标准 » 行业标准 »

JB/T 5525-2011 无损检测仪器 单通道涡流检测仪性能测试方法

时间:2024-05-13 22:38:28 来源: 标准资料网 作者:标准资料网 阅读:8146
下载地址: 点击此处下载
基本信息
标准名称:无损检测仪器 单通道涡流检测仪性能测试方法
英文名称:Non-destructive testing instruments —characteristics measured method for one-channel eddy current testing instrument
中标分类: 仪器、仪表 >> 试验机与无损探伤仪器 >> X射线、磁粉、荧光及其他探伤仪器
ICS分类: 试验 >> 无损检测
替代情况:替代JB/T 5525-1991
发布部门:中华人民共和国工业和信息化部
发布日期:2011-12-20
实施日期:2012-04-01
首发日期:
作废日期:
归口单位:全国试验机标准化技术委员会
起草单位:长春试验机研究所有限公司;爱德森(厦门)电子有限公司
出版社:机械工业出版社
出版日期:2012-04-01
适用范围

本标准规定了涡流检测仪性能测试方法。
本标准适用于单通道涡流检测仪。对于多通道涡流检测仪的相关部分也可参照使用。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 仪器 仪表 试验机与无损探伤仪器 X射线 磁粉 荧光及其他探伤仪器 试验 无损检测
Product Code:SAE J1604
Title:Rubber Boots for Drum-Type Hydraulic Brake Wheel Cylinders
Issuing Committee:Hydraulic Brake Components Standards Committee
Scope:This SAE Standard covers molded rubber boots used as end closures on drum-type wheel brake actuating cylinders to prevent the entrance of dirt and moisture, which could cause corrosion and otherwise impair wheel brake operation. The document includes performance tests of brake cylinder boots of both plain and insert types under specified conditions and does not include requirements relating to chemical composition, tensile strength, or elongation of the rubber compound. Further, it does not cover the strength of the adhesion of rubber to the insert material where an insert is used. The rubber material used in these boots is classified as suitable for operation in a temperature range of -40 to +120 degrees C +/-2 degrees C (-40 to +248 degrees F +/-3.6 degrees F).【英文标准名称】:Definitionandclassificationofgradesofsteel;germanversionEN10020:1988
【原文标准名称】:钢的等级的定义和划分
【标准号】:DINEN10020-1989
【标准状态】:作废
【国别】:德国
【发布日期】:1989-09
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:合金钢;等级(质量);非合金钢;定义;分类系统;化学成份;分类;钢
【英文主题词】:classification;steels;grades(quality);unalloyedsteels;classificationsystems;definitions;alloysteels;chemicalcomposition
【摘要】:
【中国标准分类号】:H40
【国际标准分类号】:6020
【页数】:15P;A4
【正文语种】:德语