【英文标准名称】:Plastics.Determinationofviscositynumberandlimitingviscositynumber.Part6:methylmethacrylatepolymers.
【原文标准名称】:塑料制品.粘度数值和限定粘度数值的测定.第6部分:异丁烯酸甲脂聚合物
【标准号】:NFT51-810-1993
【标准状态】:现行
【国别】:法国
【发布日期】:1993-09-01
【实施或试行日期】:1993-09-20
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Definition;Definitions;Determination;Limits(mathematics);Measurement;Measuringtechniques;Methylmethacrylate;Physicaltesting;Plastics;Polymers;Solutions;Solvents;Testing;Tests;Units;Viscosity
【摘要】:
【中国标准分类号】:G31
【国际标准分类号】:83_080_20
【页数】:6P.;A4
【正文语种】:其他
基本信息
标准名称: | 锅炉用水和冷却水分析方法 铜的测定 |
英文名称: | Analysis of water used in boiler and cooling system-Determination of copper |
中标分类: |
机械 >>
活塞式内燃机与其他动力设备 >>
锅炉及其辅助设备 |
ICS分类: |
能源和热传导工程 >>
燃烧器、锅炉 >>
锅炉和热交换器
|
替代情况: | 被GB/T 13689-2007替代 |
发布部门: | 国家技术监督局 |
发布日期: | 1993-04-24 |
实施日期: | 1994-01-01 |
首发日期: | 1993-04-24 |
作废日期: | 2008-02-01 |
主管部门: | 中国石油和化学工业协会 |
归口单位: | 全国化学标准化技术委员会 |
起草单位: | 能源部西安热工研究所 |
出版日期: | 1900-01-01 |
页数: | 平装16开, 页数:7, 字数:9千字 |
适用范围
本标准规定了水中铜含量的测定方法。本标准适用于锅炉给水、凝结水、蒸汽、水内冷发电机冷却水和炉水等水样中铜的测定。采用100mm长比色皿时,测定范围为2.5~50μg/L。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 活塞式内燃机与其他动力设备 锅炉及其辅助设备 能源和热传导工程 燃烧器 锅炉 锅炉和热交换器
【英文标准名称】:Non-destructivetesting.Acousticemission.Examinationofmetallicpressureequipmentduringprooftesting.PlanarlocationofAEsources
【原文标准名称】:无损检验.声学辐射.验收试验过程中金属压力设备的检查.AE源的平面位置
【标准号】:BSEN14584-2005
【标准状态】:现行
【国别】:英国
【发布日期】:2005-10-04
【实施或试行日期】:2005-10-04
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:验收检验;声频发射试验;声学;适配器;基础;耦合;数据分析;检波器(回路);测定;发射;材料测试;金属的;无损检验;全体人员;压力仪;特性;合格;无线电定位;传感器;信号处理;声音传播;声源;试验要求
【英文主题词】:Acceptanceinspection;Acousticemissiontesting;Acoustics;Adapters;Basis;Coupling;Dataanalysis;Detectors(circuits);Determination;Emission;Materialstesting;Metallic;Non-destructivetesting;Personnel;Pressureinstruments;Properties;Qualifications;Radiolocation;Sensors;Signalprocessing;Soundpropagation;Soundsources;Testspecifications
【摘要】:ThisEuropeanStandardspecifiesthemethodforconductingacousticemission(AE)+testingofmetallicpressureequipmentduringacceptancepressuretestingusingaplanarlocationmethod.GeneralprinciplesofacousticemissionsaredescribedinEN13554.TheobjectivesoftheAEtestingaretoprovide100%volumetrictestingtodefineregionsofthestructure,whichareacousticallyactivewithbursttypeAEe.g.asaresultofsub-criticalflawevolution;thusincreasingthereliabilityoftheacceptancetest.Thetestprovidesareferencemapforcomparisonwithresultsoffuturetests.
【中国标准分类号】:H26
【国际标准分类号】:17_140_20;77_040_20
【页数】:18P.;A4
【正文语种】:英语